UPVC Window Repairs
Your windows are crucial for both the appearance and energy efficiency of your home. However, they could be damaged or even broken.
Window repairs are usually less expensive than replacing the entire window. You can fix broken locks, damaged handles and hinges.
1. Broken Glass
If your windows are damaged it could cause drafts or allow cold air into your home. Additionally, the cracks could pose safety concerns, especially if you have young children. Luckily, it's simple to repair cracked glass windows.
Whether you're dealing with an injury from an earthquake or a window that was hit by a flying ball, the most important thing to do is fix it quickly before it gets any worse. If the crack is large enough to cover more than one glass pane or if it's wide enough that your hand could fit in the crack without putting yourself at risk of breaking or bending, you may have to replace the entire window.
Start by putting on thick cut-proof gloves and safety glasses to shield yourself from any broken pieces. Tape any cracks and broken areas to keep the glass in its place. Once the tape has been applied to the glass, gently tap it to loosen and take out any large pieces. The remaining glass should be placed in an appropriate container to dispose of it.
Then, lay the sash flat on the table and remove any bead strip around the frame so you can work with the glass. Utilizing a utility knife or deglazing tool, cut off any sealant that is around the break. Once the old glass is removed, clean the rabbet carefully to remove any traces of sealant and then prepare the new glass.
While working on the window it's best to keep a sheet of paper nearby to note down the measurements needed to take in order to purchase replacement glass. This will prevent you from making mistakes when ordering the new glass and ensure it's an exact fit.
If the glass is replaced, it's important to use a top-quality silicone sealant, as this will prevent water from getting into your home. It's also recommended to apply a polyurethane caulk on the edge of the sash, since it will add an extra layer of waterproofing. It is also important to ensure that the glass is tempered rather than annealed. This will add an extra layer of protection.
2. Frames that are cracked
Upvc is a popular material for double glazing frames due to the fact that it is durable and easy to maintain. However windows made from this material aren't immune to damage and can experience various issues that require repair services to fix them.
One of the most common problems is the cracking of the frame, that can happen due to many reasons. A crack could be caused by hitting windows with a heavy object, such as a ladder or a garden tool. The frame could break or even come away from the wall. Cracks may also occur due to natural causes, like the uPVC swell and shrink over time.
Another issue is the water leaking out of the window. This could be due to many things like the nail fins loosing or breaking completely, which allows air to enter the house. It is crucial to fix these issues promptly to stop water from infiltrating your home, as it could cause a serious issue if not dealt with.
If the hinges of a window are damaged or misaligned, it could cause drafts and leaks. These hinges are double glazed window repair responsible to compress the sash and seal to seal the window securely.
Fogging of the glass is another issue that can be found. This is caused by the seal between the two glass panes breaks enough to let air in which causes condensation. Re-sealing your window can resolve this problem.
There are a few methods to avoid these kinds of repairs, such as conducting regular maintenance and regularly cleaning your windows with soapy water. For the best results and most efficient repair, select a reputable company that specializes in uPVC. They have the tools and skills to fix your windows quickly and efficiently.
In general, you should be careful not to slam your windows against the wall because this could damage the frames and can also cause them to lose their insulation properties. Avoid direct heat, as this could cause uPVC to warp or break.
3. Incorrect Locks or Hinges
As time passes, upvc window frames will become stiff, and locks may not function properly. This can be a nuisance and leave your home feeling less secure. However, there are many ways to fix these issues without needing to purchase a new window. Window repairs are often cheaper than purchasing a whole window, saving you a few dollars. Cloudy2Clear's expert upvc repair team can fix your window handles and hinges so they work again.
UPVC windows are an excellent option for home improvement projects due to their long-lasting and energy-efficiency. But, as with everything that are made of plastic, they will become less durable over time and require regular maintenance to guarantee the best results. It is good to know that fixing your UPVC windows or doors is a simple task that can save money in the end.
Here are a few ways to fix your UPVC window that won't close:
Check the seals and the gearbox that locks. If windows are still unable to lock, you may need to adjust the frame or sash. To do this you need to loosen the four screws that attach the metal strip to the frame on the left side of the window. Loosen each screw by a full turn. Be careful not to loosen the screws that hold the hinges. They are designed to allow for the window to be closed and opened and shouldn't be tampered with.
Then, move the sash slightly either way to find the location that works best for you. You may require shims to achieve the perfect fit. Once you have found the right position, tighten all the screws and replace the plastic caps.
It is important to have functional UPVC windows for your security and comfort. If you're experiencing issues with your window, don't hesitate call the experts at Window Geeks today. They provide free estimates, no call-out costs, and a 2-year guarantee on their work. For more information, visit their website or give them a ring! They serve Widnes Runcorn St Helens and Warrington.
4. Damaged Seals
uPVC windows are made to last and do well to withstand extreme temperatures and weather conditions however that doesn't mean they come without their faults. One of the most frequent issues you can encounter with uPVC windows is condensation between the glass panes, which could be an indication of a faulty window seal or it could be a result of high humidity in your home.
In order to prevent condensation from developing on your uPVC windows, first make sure that you're not using any colored cloths around them as this can cause staining of dyes or cleaning products that contain harsh chemicals as they can damage your uPVC window frame. Instead, try to use a soft white cloth that has been soaked in water to wash your windows. If you're worried about dirt or stains piling over your window frames then it's also worth buying solvent PVC cleaner available at most hardware shops This will help clean your windows and help protect them from any possible future deterioration.
You may also find that uPVC seals are susceptible to damage over time. This is why it is essential to replace them as required. This can be done quickly and doesn't require the assistance of a professional to finish. First, you'll need take off the old seal from your window by pinching it and pulling it away. If the seal is stuck on quite tightly then you could try using a builder's knife to pray a section of it off until it is able to be pulled away from the window frame.
Once you've removed the seal from your window then you can put it back in place and ensure that it's properly fitted into the grooves of the uPVC frame. Repeat this process for each side of the window, until the seal has been completely fitted into the grooves. After this is done, you can check the corners of the window for any gaps, if any, then apply more silicone sealant to fill these gaps and make sure that the window is fully sealed.